Quick Setup Guide | NS-55DR420NA16
55" 1080P, 60Hz, LED Roku TV
INCLUDED ACCESSORIES
START HERE
WALL MOUNT
1
Remote control and two AAA batteries
How do I attach the stand to my TV? (not for wall mounting)
How do I prepare my TV for wall mounting?
(not for use with a TV stand)
You’ll need: Soft surface and Phillips screwdriver
You’ll need: Soft surface and Phillips screwdriver.
+
+
A
B
Carefully place your TV face-down on a cushioned, clean surface.
See the instructions that came with your wall mount for
more information about how to correctly mount your TV.
A
Carefully place your TV face-down on a
cushioned, clean surface.
B
Align the the TV stands with the screw holes on the bottom of the TV, then secure the stands to the TV with
the four provided screws.
OR
A
B
TV stands
A
M6 × 36 mm screws
M6 × 36 mm screws
M6 screws (36 mm length) (4 pcs.)
Right
Your TV has four VESA mounting holes on the back. If you attach a
wall-mount bracket to the back of your TV, the bracket must be securely
attached, using all four holes. If you do not use all four mounting holes,
your TV may fall and cause property damage or personal injury. See the
documentation that came with your wall mount for complete mounting
instructions.
B
Left
Power cord
MAKING CONNECTIONS
FEATURES
2
How do I watch TV (cable, satellite, or antenna) or connect a device such as a DVD or Blu-ray disc player, game console, or tablet?
Remote control sensor
WHICH CABLES
DO YOU HAVE?
Multi-purpose jacks: You can plug any device that uses HDMI into any HDMI jack. However,
certain devices must be connected to the ARC jack. See the instructions that came with your
ARC-enabled device for more information.
3
Power indicator
HDMI (BEST)
Best video quality
WHAT YOU NEED
(not included)
1
2
Phillips screw driver
ARC
Wireless router*
AV (GOOD)
Internet connection*
(needed for streaming)
AUDIO/VIDEO OUT
(needed for streaming)
TV
MUTE
AV IN
L
1
2
R
ANT / CABLE
RESET
ARC
VIDEO
USB
FIND YOUR USER GUIDE ONLINE!
click Support & Service. Enter
NS-55DR420NA16 in the box under
Manual, Firmware, Drivers & Product
COAXIAL
(GOOD)
3
CABLE
Information, then click
►.
ANT / CABLE
STOP
Do not plug your power cord in until all
other devices have been connected.
SPDIF
CONNECTING AUDIO DEVICES How do I connect my TV to external speakers?
3
*Subscription or other payment may
be required to access certain content.
USING DIGITAL AUDIO
OPTICAL
INPUT
AV IN
L
1
2
R
ANT / CABLE
ARC
VIDEO
SOUNDBAR
SPDIF
Before using your new product, please read these
instructions to prevent any damage.
Note: See the instructions that came with your speakers for more information.
|