Invacare High Chair Ventilator Tray User Manual

SolaraVentilatorTray Option  
Assembly,Installation and Operating Instructions  
INSTALLATION WARNINGS  
SAVE THESE INSTRUCTIONS  
Afte r ANY a d justm e nts, re p a ir or se rvic e a nd  
BEFORE use , m a ke sure tha t a ll a tta c hing  
ha rd wa re is tig hte ne d se c ure ly.  
NOTE: Check all parts for shipping damage. In case of  
damage, DO NOT use. Contact Carrier/Invacare for fur-  
ther instructions.  
SAFETY SUMMARY  
INSTALLING THE VENTILATOR  
TRAY (FIGURE 1)  
The following recommendations are made for the safe  
and proper installation and use of the Ventilator Tray:  
NOTE: Refer to the following diagram for the proper loca-  
tion of the ventilator tray attachment points.  
GENERAL WARNINGS  
DO NOT insta ll this e q uip m e nt witho ut first  
re a d ing a nd und e rsta nd ing this instruc tion  
she e t. If you a re una b le to und e rsta nd the  
Wa rning s, Ca utions a nd Instruc tions, c onta c t  
a he a lthc a re p rofe ssiona l, d e a le r or te c hni-  
c a l p e rsonne l if a p p lic a b le , b e fore a tte m p t-  
ing to insta ll this e q uip m e nt - othe rwise , in-  
jury or d a m a g e m a y oc c ur.  
1. Attach the ventilator tray components in the following  
order:  
A. Install the ventilator tray hanger bracket onto the  
ventilator tray.  
B. Install the ventilator brace onto the chair frame.  
C. Install the ventilator tray onto the chair frame.  
D. Install the ventilator arms onto the ventilator tray/  
chair frame.  
D. Refer to INSTALLING THE  
VENTILATOR ARMS ONTO THE  
VENTILATOR TRAY/CHAIR  
B. Refer to INSTALLING THE  
VENTILATOR BRACE ONTO  
THE CHAIR FRAME in this  
Instruction Sheet.  
FRAME in this Instruction Sheet.  
Ventilator Tray  
Chair Frame  
A. Refer to INSTALLING THE  
VENTILATOR TRAY HANGER  
BRACKET ONTO THE VENTILATOR  
TRAY in this Instruction Sheet.  
C. Refer to INSTALLING THE  
VENTILATOR TRAY ONTO THE  
CHAIR FRAME in this Instruction  
Sheet.  
FIGURE 1 - INSTALLING THE VENTILATOR TRAY/ATTACHMENT POINT LOCATIONS  
1
 
Chair Frame  
Upper Brace  
Ventilator Tray  
Tube Clamp (STEP 1)  
Lower  
Brace  
5/16-24x1-1/2-inch  
Hex Head Screw  
(STEP 4)  
Self Locking  
Nut (STEP 6)  
Middle Brace  
Rear  
Front  
Middle Mounting  
Hole (STEP 3)  
Ventilator Brace  
(STEP 5)  
Mounting Hole  
(STEP 3)  
Clamp Saddle  
(STEP 5)  
Self Locking Nut  
(STEP 4)  
Tube Clamp (STEP 1)  
Ventilator Tray Hanger Bracket (STEP 5)  
Mounting Holes  
(STEP 5)  
1/4-20x1-1/2-inch Button  
Head Screws (STEP 6)  
NOTE: The ventilator tray hanger bracket and the venti-  
lator brace are shown unattached for clarity.  
FIGURE 4 - INSTALLING THE VENTILATOR TRAY ONTO THE CHAIR FRAME  
Chair Frame  
Installing The Ventilator Arm s Onto The  
Ventilator Tray/ Chair Fram e (FIGURE 5)  
5/16-24x1-1/2-inch Button  
Head Screws  
1. Position one (1) ventilator tray arm on the UPPER  
brace of the chair frame by firmly grasping the tube  
clamp on the top of the ventilator tray arm and bend-  
ing it around the UPPER brace of the chair frame.  
Tube Clamp  
Upper Brace  
2. Secure the tube clamp on the ventilator tray arm to  
the UPPER brace of the chair frame using one (1)  
5/16 - 24 x 1-1/2-inch hex cap screw and self locking  
nut. Hand tighten ONLY.  
Ventilator Tray Arms  
Self  
Locking  
Nut  
3. Position the LOWER end of the ventilator tray arm  
UNDER the ventilator tray, making sure the two (2)  
mounting holes in the LOWER end of the ventilator  
tray arm align with the two (2) mounting holes in the  
REAR of the ventilator tray.  
Rear  
1/4-20x1/2-inch  
Button Head  
Screws  
4. Secure the ventilator tray arm to the ventilator tray  
using two (2) 1/4 - 20 x 1/2-inch button head screws  
and self locking nuts. Hand tighten ONLY.  
Mounting Holes  
Self  
Locking Nuts  
5. Repeat STEPS 1 - 4 for the other vent tray arm.  
Ventilator Tray  
6. Securely tighten ALL attaching hardware on the  
ventilaor tray.  
FIGURE 5 - INSTALLING THE VENTILATOR ARMS  
ONTO THE VENTILATOR TRAY/CHAIR FRAME  
3
 
DETAIL “J”  
Strap  
DETAIL “K”  
Strap  
USING THE VENTILATOR TRAY  
(FIGURE 6)  
NOTE: The ventilator tray straps are positioned on the  
ventilator tray BEFORE the ventilator tray is shipped.  
Rear  
Slide  
Portion  
of Buckle  
1. Position all six (6) strap slides on the outside of the  
ventilator tray.  
2. Position the ventilator battery in the front portion of  
the ventilator tray.  
See Detail “J”  
See Detail “K”  
Rear Portion  
of Ventilator  
Tray  
3. Secure the two (2) straps around the top of the ven-  
tilator battery and clip together.  
Ventilator  
Battery  
4. Position the ventilator in the rear portion of the venti-  
lator tray.  
Buckle  
5. Secure the four (4) straps around the top of the ven-  
tilator and clip together.  
Slide  
6. Adjust the slides, located in the middle of each strap,  
up or down to increase or decrease length. See DE-  
TAIL “J”.  
Ventilator  
Tray  
7. Securely tighten the straps around the battery and  
ventilator by pulling the ends of the straps through  
the rear portion of each buckle DETAIL “K”.  
Front Portion  
of Ventilator  
Tray  
FIGURE 6 - USING THE VENTILATOR TRAY  
Invacare Corporation  
Technical Support  
800-832-4707  
One InvacareWay  
Elyria, Ohio USA  
44036-2125  
Invacare andYes,you can” are trademarks of Invacare  
Corporation.  
©
2000 Invacare Corporation  
Form No. 99-203 Part No. 1093582 Rev B (1) 03/00  
800-333-6900  
 

IOGear Network Router GNS1000 User Manual
Jet Tools Drill JDP 15M MF User Manual
JVC DVD Player TH C6 User Manual
JVC Home Theater System DD 3 User Manual
JVC Portable CD Player 0709KMMCREBET User Manual
JVC Stereo Amplifier KS AX4302 User Manual
KitchenAid Dishwasher W10300928B User Manual
KitchenAid Recording Equipment KERS505 User Manual
KitchenAid Refrigerator KBFA20ERSS01 User Manual
Knoll Speaker Q450RS User Manual