JVC CRT Television LT 32EX177 User Manual

COLOUR TELEVISION  
INSTRUCTIONS  
Contents  
Safety precautions......................... 2  
Set up and connections................. 3  
Initial settings................................. 5  
Remote control buttons  
and functions................................. 6  
LT-32EX17  
LT-32EX177  
LT-37EX17  
LT-42EX17  
TV buttons and functions............... 7  
Operating the menus..................... 8  
Picture setting................................ 9  
Original features for picture......... 12  
Sound setting .............................. 13  
Customized setting...................... 14  
Operate JVC recorders and  
other devices............................... 16  
TV channel presetting ................. 18  
Troubleshooting........................... 19  
CH/CC List................................... 21  
Specification................................ 22  
This illustration shows LT-32EX17.  
The illustrations of LT-32EX17 is used in this instruction manual for explanation  
purpose. Your TV may not look exactly the same as illustrated.  
GGT0191-001A-H  
 
Set up and connections  
Check accessories  
Please read the user manuals of each device carefully before setup.  
It is necessary to connect an aerial to watch TV.  
Connect with other devices “Connecting external devices” (P.4)  
Insert the batteries  
Remote control  
(RM-C1857)  
Use two “AAA/R03” dry cell batteries.  
Insert the batteries from the · end,  
making sure the ª and · polarities  
are correct.  
Connect an aerial and VCR / DVD Player  
AERIAL  
“AAA/R03” Batteries  
For confirming  
the TV works  
VIDEO-3  
INPUT  
R
L/MONO  
V
S
Care when setting  
Power requirements  
Connect the power cord only to a 110-240 V, 50/60 Hz AC outlet.  
(Except China, Russia : connect to a 220-240 V, 50/60 Hz AC outlet.)  
When attaching the TV to the wall, use the optional JVC wall  
mounting unit.  
OR  
Consult a qualified technician.  
JVC assumes no responsibility for damage due to improper mounting.  
200 mm x 200 mm mount which conforms to VESA standards.  
Installation requirements  
To avoid overheating, ensure the unit has ample room.  
VCR (DVD Player)  
200mm  
After all the connections have been made, insert the plug into an AC  
outlet.  
If both composite and S-VIDEO cables are connected, S-VIDEO will  
be enable.  
150mm 50mm  
150mm  
50mm  
3
 
Set up and connections (continued)  
You can connect many different devices to the rear panel of the TV.  
Please read the user manuals of each device before setting up.  
(Connecting cables are not supplied with this TV.)  
Connecting external  
] signal direction  
VIDEO-1  
Watching DVDs  
DVD player  
(HDMI compatible)  
Output  
Input  
]
Composite signal/  
Component signal  
Sound L / R  
IN HDMI  
VCR / DVD Player  
Use component signal:  
“Video-1 Setting” (Page 15)  
]
Amplifier  
VIDEO-2  
Watching videos  
(L)  
(R)  
Output  
Input  
HDMI  
]
Composite signal  
Sound L / R  
OUT  
VIDEO/AUDIO  
(DIGITAL)  
INPUT  
R
L
V
OUTPUT  
VIDEO-1  
IN HDMI  
VIDEO-3  
Watching videos  
L
R
L
V
Y
VCR / DVD Player  
]
]
VIDEO-1  
INPUT  
Output  
Input  
Pr/Cr  
Pb/Cb  
R
Composite signal/  
S-VIDEO  
Sound L / R  
VIDEO-2  
INPUT  
AUDIO  
(ANALOG)  
Game consoles  
Video camera  
R
L
V
VIDEO-3  
INPUT  
Use S-VIDEO:  
R
L/MONO  
V
S
If both composite and S-VIDEO  
cables are connected, S-VIDEO will  
enable.  
]
VIDEO-3  
VIDEO-2  
Connecting  
HDMI devices  
HDMI  
Output  
Input  
HDMI signal  
“HDMI Setting” (Page 15)  
OUT  
Video and sound signal of a TV  
channel you are viewing outputs from  
this terminal.  
]
Headphone  
Output  
Headphone  
Composite signal  
Sound L / R  
4
 
Initial settings  
Turn on the TV.  
Automatically register channels  
AUTO PROGRAM  
CH 28  
14%  
1
2
4
5
6
Show only when powering on for the first time.  
The power on the unit can also be used.  
Select a language  
Check what was registered  
EDIT  
LANGUAGE  
PR  
AV  
01  
02  
03  
04  
05  
06  
ID  
CH/ CC  
CH 04  
CH 09  
CH 02  
CC 76  
CC 78  
CH 05  
CH 07  
ENGLISH  
‰∑¬  
Select  
Tieáng Vieät  
УKPAЇHCЬKA  
CASTELLANO  
FRANÇAIS  
PУCCKИЙ  
Set  
Edit Channels  
\ “TV channel presetting” (P. 18)  
Select the teletext language group  
TELETEXT LANGUAGE  
Confirm  
GROUP – 1  
GROUP – 2  
GROUP – 3  
GROUP – 4  
GROUP – 5  
Select  
3
For the teletext language group  
\ Teletext Language” (P. 12)  
If the characters are unreadable  
\ Teletext Language” (P. 12)  
5
 
Remote control buttons and functions  
Turn the TV on from standby  
Change channel / page  
Turn the volume Off / On  
RETURN PLUS function  
Return to the frequently viewed channel.  
Choose the channel you want to programme  
RETURN PLUS  
PROGRAMMED!  
Press and hold  
To teletext (P. 12)  
To cancel  
RETURN PLUS  
CANCELED!  
Press and hold  
Switch between “TV / VCR / DVD / AUDIO” (P. 16)  
Display menu on screen menu (P. 8)  
Operate the menu  
RETURN function  
If you have not set or have canceled the RETURN  
PLUS channel, this will return to the previously  
viewed channel.  
Select Channel  
Select the desired channel number.  
For Hyper Scan:  
View the Teletext(P. 12)  
Select TV or Video input  
PR changes without changing the  
picture. Once you stop pressing  
or button, picture will  
change to the desired PR.  
Adjust the volume, Turn off Muting  
Press and hold  
Channel information  
To previous screen  
View the Teletext(P. 12)  
Not available  
FAVOURITE CHANNEL (P. 12)  
Change the aspect ratio  
Turn on “CINEMA SURROUND”  
6
 
TV buttons and functions  
TV/VIDEO  
MENU/OK  
Switch between TV / VIDEO devices  
Display on-screen menu / set  
Change channel / page  
Hyper Scan Function  
CHANNEL  
VOLUME  
Volume  
Power On / Off  
Remote control sensor  
Power lamp  
ON: Lit (Green)  
OFF: Unlit  
To headphones (P. 4)  
Power lamp lights while  
the TV is on.  
7
 
Operating the menus.  
Menu  
Item  
PICTURE MODE  
BACK LIGHT  
CONTRAST  
BRIGHT  
Adjustments / Configurations  
Picture mode (BRIGHT / SOFT / STANDARD)  
Backlight brightness (Darker j Brighter)  
Contrast (Lower j Higher)  
1 Display the menu bar  
MENU  
PICTURE  
SOUND  
FEATURES  
SET UP  
Brightness (Darker j Brighter)  
SHARP  
Sharpness (Softer j Sharper)  
2 Select a menu  
COLOUR  
Colour (Lighter j Deeper)  
Tint (Reddish j Greenish) Only NTSC  
Finer picture adjustments. (WHITE BALANCE /  
Select  
TINT  
FEATURES  
DIGITAL VNR / DigiPure / PULL DOWN /  
COLOUR MANAGEMENT / PICTURE MANAGEMENT /  
COLOUR SYSTEM / 4:3 AUTO ASPECT)  
Next  
PICTURE  
STEREO / I II  
Mode / Languages (  
: MONO /  
: STEREO /  
PICTURE MODE  
BACK LIGHT  
CONTRAST  
BRIGHT  
SHARP  
COLOUR  
BRIGHT  
3 Select an item  
I : SUB1 / II : SUB2 / MONO)  
Low tones (Weaker j Stronger)  
High tones (Weaker j Stronger)  
Speaker balance (Left Stronger j Right Stronger)  
Ambience level (HIGH / LOW / MONO / OFF)  
Select  
BASS  
Items  
TREBLE  
BALANCE  
CINEMA SURROUND  
TIMER  
TINT  
FEATURES  
Set timer for turning off or turning on the TV.  
(ON TIMER / SLEEP TIMER)  
4 Adjust / Configure  
Set  
CHANNEL GUARD  
BLUE BACK  
Stops children from watching specific channels  
Displays a blue screen and mute the sound when the signal  
is weak or absent. (ON / OFF)  
PICTURE MODE  
STANDARD  
CHILD LOCK  
Disables the front control buttons of the TV. (ON / OFF)  
Adjust / Select  
AUTO SHUTOFF  
Set the power to turn off if no signal is received and no  
operation is performed for about 15 minutes. (ON / OFF)  
FAVOURITE SETTING  
APPEARANCE  
Clear favourite channel settings.  
When adjusting with  
the sliding-bar  
Format for displaying the channel number and menu screen  
(TYPE A / TYPE B).  
Set  
ECO MODE  
Adjust picture contrast according to room bright.  
(OFF / ECO-1 / ECO-2)  
Select  
Move  
AUTO PROGRAM  
EDIT / MANUAL  
LANGUAGE  
Automatically registers channels.  
Change registered channels or add new ones.  
Select a language for on-screen menus.  
When adjusting from  
presets  
Set  
VIDEO-1 SETTING  
For use with video players and other devices.  
(VIDEO / COMPONENT)  
(
STANDARD  
)
AI VOLUME  
Prevent sudden increase or decrease of sound when  
changing channels. (ON / OFF)  
Select  
The item will change.  
TELETEXT LANGUAGE  
HDMI SETTING  
Select a language for Teletext programmes.  
Some items have a  
sub-menu.  
HDMI: Size (1 / 2 / Auto)  
Audio (DIGITAL / ANALOGUE / AUTO)  
8
 
Picture setting  
COLOUR SYSTEM  
WHITE BALANCE  
You can select the appropriate colour system when the picture is not clear  
or no colour appears.  
You can change the white balance of the picture to better match the type  
of video being viewed.  
MENU  
PICTURE menu  
FEATURES  
WHITE BALANCE  
MENU  
COLOUR SYSTEM  
PICTURE menu  
FEATURES  
WARM  
COOL  
MID  
Reddish white  
Bluish white  
Normal white balance  
AUTO  
PAL  
SECAM  
NTSC3.58  
NTSC4.43  
For the colour system in each country or region, see the table below:  
Area  
Country or Region  
System  
BACK LIGHT  
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,  
Yemen, Indonesia, Malaysia, Singapore, Thailand,  
India, China, Vietnam, Hong Kong, etc.  
PAL  
You can change the backlight brightness.  
Asia,  
Middle East  
MENU  
PICTURE menu  
BACK LIGHT  
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
SECAM  
NTSC  
Choose  
1 : Darker  
2 : Brighter  
SECAM  
Europe  
Czech Republic, Poland, Germany, Holland, Belgium,  
UK, etc.  
PAL  
CONTRAST  
Australia, New Zealand, etc.  
Republic of South Africa, Nigeria, etc.  
Egypt, Morocco, etc.  
Oceania  
Africa  
PAL  
PAL  
You can change the contrast of the picture.  
SECAM  
MENU  
PICTURE menu  
CONTRAST  
PICTURE MODE  
Choose  
1 : Lower  
2 : Higher  
You can choose the desired picture setting.  
MENU  
PICTURE menu  
PICTURE MODE  
BRIGHT  
You can change the brightness of the picture.  
BRIGHT  
SOFT  
Heightens contrast and sharpness.  
Softens contrast and sharpness.  
Standard picture setting.  
MENU  
PICTURE menu  
BRIGHT  
STANDARD  
Choose  
1 : Darker  
2 : Brighter  
9
 
Picture setting (continued)  
SHARP  
DigiPure  
You can change the sharpness of the picture.  
You can set the picture for a natural-looking outlines.  
MENU  
PICTURE menu  
SHARP  
MENU  
PICTURE menu  
FEATURES  
DigiPure  
Choose  
1 : Softer  
2 : Sharper  
ON  
Set to a natural-looking picture.  
Function is turned off.  
OFF  
COLOUR  
PULL DOWN  
You can change the sharpness of the picture.  
You can set the picture for smooth cinema film.  
MENU  
PICTURE menu  
FEATURES  
PULL DOWN  
MENU  
PICTURE menu  
COLOUR  
Choose  
1 : Lighter  
2 : Deeper  
ON  
Function is always on.  
AUTO  
OFF  
Automatically adjusts.  
Function is turned off.  
TINT  
ECO MODE  
You can adjust Tint only in NTSC.  
You can adjust TV screen contrast according to the brightness of your  
room.  
MENU  
PICTURE menu  
TINT  
MENU  
FEATURES menu  
ECO MODE  
Choose  
1 : Reddish  
2 : Greenish  
OFF  
Function is turned off.  
ECO-1  
ECO-2  
Mild contrast (recommended)  
Even contrast.  
DIGITAL VNR  
You can cut down the amount of noise in the original picture.  
MENU  
PICTURE menu  
FEATURES  
DIGITAL VNR  
ON  
OFF  
Reduce the picture noise.  
Function is turned off.  
Note: For component progressive and HDMI signal, the DIGITAL VNR  
function cannot operate.  
10  
 
Picture setting (continued)  
4:3 AUTO ASPECT  
COLOUR MANAGEMENT  
You can change the aspect ratio.  
You can set the picture for a natural-looking pictures.  
MENU  
PICTURE menu  
FEATURES  
COLOUR MANAGEMENT  
MENU  
PICTURE menu  
FEATURES  
4:3 AUTO ASPECT  
14:9 ZOOM  
PANORAMIC  
REGULAR  
ON  
OFF  
Maintain a natural colour balance.  
Function is turned off.  
16 : 9  
4 : 3  
14 : 9  
Select a default aspect ratio for Auto in “ZOOM”  
ZOOM  
AUTO  
PICTURE MANAGEMENT  
Select  
You can fix the brightness and the darkness of the pictures.  
REGULAR  
ZOOM  
PANORAMIC  
14 : 9 ZOOM  
16 : 9 ZOOM  
16 : 9 ZOOM SUBTITLE  
FULL  
MENU  
PICTURE menu  
FEATURES  
PICTURE MANAGEMENT  
Set  
ON  
Make it easier to view bright / dark pictures.  
Function is turned off.  
OFF  
Using “AUTO” : Auto in “ZOOM”  
When 720p (750p) or 1080i (1125i) signal is received, the signal will  
be displayed as “FULL”. The zoom menu will not be displayed.  
BLUE BACK  
DEMO MODE  
You can set the TV to automatically change to a blue screen and mute the  
sound if the signal is weak or absent, or when there is no input from an  
antenna or connected devices.  
You can confirm the effect of “PICTURE MANAGEMENT”.  
(Yellow)  
Press  
to “DEMO MODE”.  
MENU  
FEATURES menu  
BLUE BACK  
 
The other hand, you can display “DEMO MODE” by press  
of TV buttons at the same time.  
and  
 
ON  
OFF  
Function is turned on.  
Function is turned off.  
11  
 
Original features for picture  
TELETEXT  
FAVOURITE CHANNEL  
You can watch the Teletext broadcast channel with TEXT function.  
You can register and recall 4 favorite channels to a button.  
Register the favourite channel:  
TV mode  
TEXT twin mode  
TEXT mode  
1
1 While the channel is displayed.  
2 Selecting other Teletext pages.  
SET  
1 – 4?  
(Red) (Green) (Yellow) (Blue)  
OR  
OR  
Hold down for 3 seconds.  
2 Press the number button (number 1 to 4 button only) to register it on.  
“PROGRAMMED!” appears on the screen and current channel is  
registered.  
to return to the TV mode.  
3
Recall the favourite channel:  
You can also operate the teletext using the following buttons:  
Hold a teletext page.  
To cancel, press the button again.  
Display the hidden information (example: answers to a quiz).  
To cancel, press the button again.  
Enlarge the teletext display.  
(Hold)  
1
(Reveal)  
FAVOURITE  
1 – 4?  
(Size)  
(Cancel)  
Watch TV programme while waiting for a teletext page.  
When the teletext page is found, a page number appears at  
the upper left of the screen.  
2 Press the number you registered. The favorite channel will appear on  
the screen with mark beside the channel number.  
Check your favourite channels.  
Press and confirm that the channels you have registered have a  
beside them.  
Press the button to view the teletext page.  
Return to the index page instantly.  
(Index)  
Bookmark your favourite page, press MODE button then  
select a coloured button to save your page to (red, green,  
yellow and blue). Enter the number of the page to save. Then  
press ¤ button for save your favourite page. Recall your  
favourite page, press the coloured button.  
MODE and  
(LIST MODE)  
If the favourite channel has not been registered, then “NO MEMORY”  
will be displayed.  
y (Sub-page)  
Sub-page numbers are displayed at the bottom of the screen.  
To cancel sub-page function, press the button again.  
Delete the favourite channel:  
Group  
Group-1  
Group-2  
Languages  
Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese, Greek, Swedish, Finnish  
MENU  
FEATURES menu  
FAVOURITE SETTING  
Select the favourite channel  
1
Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian, German, French, Italian,  
Swedish, Finnish  
FAVOURITE SETTING  
1
PR 01  
PR 03  
PR 04  
Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian, Croatian, Slovenian, Czech,  
Slovak, English, German  
Group-3  
Group-4  
Group-5  
that you want to delete the  
channel from the Favourite  
channel.  
2
3
4
Arabic, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish, Portuguese, Swedish,  
Finnish  
Farsi, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish, Portuguese, Swedish,  
Finnish  
(Blue)  
2 Press  
to delete.  
If the character are unreadable. \ Select different teletext language group. (P. 5)  
12  
 
Sound setting  
BASS  
CINEMA SURROUND  
You can adjust the low tone of the sound.  
You can enjoy an ambient sound.  
MENU  
SOUND menu  
BASS  
Choose  
1 : Weaker  
2 : Stronger  
CINEMA SURROUND  
OFF  
TREBLE  
You can adjust the high tone of the sound.  
MENU  
SOUND menu  
TREBLE  
You can also operate this function from the menu.  
MENU  
SOUND menu  
CINEMA SURROUND  
Choose  
1 : Weaker  
2 : Stronger  
BALANCE  
HIGH  
LOW  
For stereo sound  
For stereo sound (when the sound distorts in “HIGH” mode)  
For mono sound (emulates a stereo-like sound)  
Function is turned off.  
You can adjust the volume balance between the left and right speakers.  
MONO  
OFF  
MENU  
SOUND menu  
BALANCE  
Choose  
Choose  
1 : Turn the left speaker’s volume level up.  
2 : Turn the right speaker’s volume level up.  
AI VOLUME  
SOUND SYSTEM  
You can prevent sudden increase or decrease of sound when changing  
channels.  
For the sound system in each country or region, see the table below:  
Area  
Country or Region  
System  
MENU  
SET UP menu  
AI VOLUME  
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen,  
Indonesia, Malaysia, Singapore, Thailand, India, etc  
B/G  
ON  
OFF  
Set to prevent sudden increase or decrease of sound.  
Function is turned off.  
China, Vietnam, etc.  
D/K  
I
Asia,  
Middle East  
Hong Kong, etc.  
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.  
Philippines, Taiwan, Myanmar, etc.  
Russia, Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
B/G  
M
STEREO / I II  
You can enjoy the stereo and bilingual broadcasted programmes.  
D/K  
B/G  
I
STEREO / I II  
MENU  
SOUND menu  
Europe  
Select to MONO sound.  
Select to STEREO sound.  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, Egypt, Morocco, etc.  
Oceania  
Africa  
B/G  
I
I
Select to bilingual sound. (SUB I)  
Select to bilingual sound. (SUB II)  
Select to MONO sound.  
II  
MONO  
B/G  
This function is only available in RF mode.  
13  
 
Customized setting  
Set the ON TIMER to your desired period of time by press the number  
button. When the ON TIMER is set to other than 00:00, the ON TIMER  
is activated. You can set the period of time to a maximum of 12 hours in  
1 minute intervals.  
SLEEP TIMER  
3
You can set the TV to turn off automatically to standby mode after a set  
time.  
(Blue)  
MENU  
FEATURES menu  
TIMER  
SLEEP TIMER  
1
2
To off the ON TIMER, set the ON TIMER to 00:00 or press  
button.  
Note : If TV is not in standby mode when ON TIMER is reach the setting  
time, this case is not available.  
SLEEP TIMER  
Select a time in minutes.  
0
120  
OFF  
AUTO SHUTOFF  
Set  
You can set the TV to turn off automatically when no signal is received for  
about 15 minutes or longer after the end of a broadcast.  
Cancel  
Remaining  
Set the time to “0”.  
MENU  
FEATURES menu  
AUTO SHUTOFF  
You can confirm the remaining time, after repeating this  
process.  
ON  
OFF  
Set the power to turn off.  
Function is turned off.  
Note : When the remaining elapse time is one minute, “GOODNIGHT”  
appears on the screen.  
ON TIMER  
APPEARANCE  
You can set the TV to turn on automatically from standby mode at a set  
channel and time.  
You can set the format for displaying the channel number and menu  
screen.  
MENU  
FEATURES menu  
APPEARANCE  
MENU  
FEATURES menu  
TIMER  
ON TIMER  
1
2
TYPE A  
TYPE B  
Set to the transparent format.  
Set to the solid format.  
ON TIMER  
PR  
ON TIME  
01  
00 : 00  
Select PR Channel.  
CHILD LOCK  
Set  
You can disable the front control buttons of the TV.  
MENU  
FEATURES menu  
CHILD LOCK  
Choose the PR (channel) that you want to watch when the TV turns on.  
External input and AV position cannot be chosen for PR.  
ON  
OFF  
The front control buttons cannot operate.  
Function is turned off.  
14  
 
Customized setting (continued)  
LANGUAGE  
VIDEO-1 SETTING  
You can choose the desired on screen display language.  
You can set the VIDEO-1 SETTING according to the video signal output  
from external devices connected to the VIDEO-1 terminal.  
MENU  
SET UP menu  
LANGUAGE  
MENU  
SET UP menu  
VIDEO-1 SETTING  
CHANNEL GUARD  
VIDEO  
For normal video signal  
You can stop children from watching specific channels.  
COMPONENT  
For component video signal  
MENU  
FEATURES menu  
CHANNEL GUARD  
1
2
For connection \ Page 4.  
FEATURES  
TIMER  
CHANNEL GUARD  
BLUE BACK  
)
Select “CHANNEL GUARD”  
(
(
(
ON  
ON  
ON  
)
)
)
0
CHILD LOCK  
AUTO SHUTOFF  
FAVOURITE SETTING  
APPEARANCE  
ECO MODE  
HDMI SETTING  
)
(
(
TYPE B  
OFF  
)
)
You can set the HDMI SETTING according to your liking.  
MENU  
SET UP menu  
HDMI SETTING  
Enter an “ID No.” (A secret  
number of your choice)  
3
4
SET ID NO.  
0000  
SIZE  
AUDIO  
1 / 2 / AUTO  
DIGITAL / ANALOGUE / AUTO  
To the next column  
3
Set  
Note : SIZE is displayed only for 480p signal.  
CHANNEL GUARD  
PR  
AV  
01  
02  
03  
04  
05  
06  
ID  
CH/ CC  
CH 04  
CH 04  
CH 02  
CH 12  
CH 03  
CH 05  
CH 29  
Select a channel to lock.  
SELECT THE EXTERNAL SOURCE  
You can set the AV SELECT according to the connected device.  
1
CHANNEL GUARD  
AV SELECT  
Select  
5
PR  
AV  
01  
02  
03  
04  
05  
06  
ID  
CH/ CC  
CH 04  
CH 04  
CH 02  
CH 12  
CH 03  
CH 05  
CH 29  
0
1
2
3
4
AV  
(Blue)  
or  
VIDEO-1  
VIDEO-2  
VIDEO-3  
HDMI  
Set  
Lock more channels by repeat step 4 and 5.  
Note : TV/VIDEO button select the video source by move down or use  
button 0-4 for selection.  
(Blue)  
Release a channel by press  
again in step 5.  
View a locked channel by use the numerical buttons to enter the  
2 Operate the connected device.  
channel number. When appears, press  
(If you forget your “ID No.”, check it in step 2.)  
and enter your “ID No.”  
15  
 
Operate JVC recorders and other devices  
The included remote control can be used to operate JVC recorders and  
other devices.  
Try changing the remote control code if you cannot operate  
a recorder.  
Code A or 1 (Default)  
Code C or 3  
Turn on the device  
1
2
Press and hold  
Press and hold  
Confirm the code for your recorder by checking the manual it came with.  
Some models of JVC devices cannot be operated with this remote  
control.  
JVC DVD recorders and HDD recorders are set to code “C” or “3” by  
default.  
Select a device  
VCRs  
DVD recorders  
HDD recorders  
Home  
theatre  
system  
Note:  
If the battery is removed, the remote control code reverts back to code A  
or 1.  
TV (P.6) DVD Players  
TV  
VCR/DVR  
DVD  
AUDIO  
The indicator lights for  
3 seconds each time the  
remote control is operated.  
16  
 
Operate JVC recorders and other devices (continued)  
Operate the device  
Other buttons can be used to operate the TV at any time.  
Operate the VCR, DVD recorder or HDD recorder (VCR / DVR)  
Operate the home theatre system (AUDIO)  
Operate AUDIO menus  
Playback etc.  
Operate DVD / HDD recorder menus  
Playback / Record etc.  
Display  
menu  
Display  
menu  
Rewind /  
Playback /  
Fast-forward  
Rewind /  
Playback /  
Fast-forward  
Select  
Select  
Stop / Pause  
Record /  
Stop / Pause  
Back to  
previous menu  
Back to  
Display  
Display  
top menu  
Select a chapter  
previous menu  
Select a chapter  
top menu  
OK  
OK  
Display the subtitle \ press  
Mute \ press  
Display the subtitle (DVD / HDD recorder mode) \ press  
Operate the DVD player (DVD)  
Volume \ press  
Operate DVD menus  
Playback etc.  
Select a surround mode \ press  
Display  
menu  
Rewind /  
Playback /  
Fast-forward  
Select  
Stop / Pause  
Back to  
previous menu  
Display  
top menu  
Select a chapter  
OK  
Display the subtitle \ press  
17  
 
TV channel presetting  
To register the TV channels automatically  
(AUTO PROGRAM)  
(Red)  
Edit a channel name  
(ID)  
1 Begin  
Enter the first  
character.  
You can register the TV channels into the TV’s channel list (PR LIST)  
automatically.  
2 Enter a channel name  
MENU  
SET UP menu  
AUTO PROGRAM  
1
2
Next column  
3
Set  
(Green)  
Insert a channel  
(INSERT)  
or  
to start and to stop AUTO PROGRAM function.  
1 Begin  
Select  
To EDIT / MANUAL menu appears.  
2 Select a “CH/CC”  
3
3 Enter a number, then receives the broadcast  
To edit the TV channels  
(EDIT / MANUAL)  
signal.  
(Yellow)  
Delete  
1 Delete  
1
2
MENU  
SET UP menu  
EDIT / MANUAL  
(Blue)  
Register a new  
channel (MANUAL)  
EDIT  
1 Begin  
2 Beginning channel search  
From high  
frequencies  
PR  
AV  
01  
02  
03  
04  
05  
06  
ID  
CH/ CC  
CH 04  
CH 04  
CH 02  
CH 12  
CH 03  
CH 05  
CH 29  
Select the channel.  
(Red)  
(Green)  
From low  
frequencies  
or  
Auto-search begins, and the nearest fre-  
quency is imported. (Repeat this step until  
3 EDIT or MANUAL the channel.  
Move a channel’s  
the desired channel is displayed.)  
Channel fine tuning by (Green)  
If the picture or sound  
is unnatural.  
/
(Blue)  
1 Begin  
Move out  
position (MOVE)  
Select  
2 Select a destination  
3 Finish  
Move in  
Set a  
sound  
system.  
3 Finish  
Set  
18  
 
Troubleshooting  
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.  
Problem  
Actions  
Page  
Problem  
Actions  
Unnatural colour >>  
Adjust “COLOUR” and “BACK LIGHT”.  
Check your “COLOUR SYSTEM”.  
If “AUTO” is selected, select the specific  
colour system manually.  
Page  
Severe noise or snow  
Check the aerial cable and TV connections.  
Check the direction of the aerial.  
Check the aerial or its cable damaged or  
not.  
Poor picture quality  
9
Noise >>  
Set to the following functions.  
10  
10  
Patterns, stripes or noise Interference caused by devices such as an  
amplifier, personal computer, or a hair drier.  
Move it away from the TV.  
PICTURE MODE : STANDARD  
DigiPure  
: ON  
Dull picture >>  
Set to the following functions.  
Ghosting (Doubling of  
images)  
Interference occurs caused by signal  
reflecting from mountains or building. Try to  
adjust the aerial’s direction or use another  
antenna.  
PICTURE MODE : BRIGHT  
DigiPure  
: ON  
Strange picture when  
using an external device.  
If the top of the image is distorted, check  
the video signal quality itself.  
Cannot turn it on  
Ensure the power cord is connected to the  
AC outlet correctly.  
If movement appears unnatural when  
receiving a signal from a DVD player, etc.  
with 625p (progressive-scanning), change  
the output setting of the external device to  
625i (interlace-scanning).  
Cannot operate the  
remote control  
The batteries may be exhausted. Replace  
with new batteries.  
Ensure that you are operating the remote  
control at less than 7 meters from the front  
of your TV.  
Poor sound  
Adjust the “BASS” and “TREBLE”.  
If receiving a poor signal in “STEREO/I II”  
switch to “MONO”.  
13  
13  
Remote control stops  
working.  
Unplug TV, several minutes later plug it in  
again.  
8
Adjust the channel reception using  
“MANUAL”.  
18  
15  
Front control buttons do  
not work.  
Switch “CHILD LOCK” to “OFF”.  
For HDMI signal, wrong  
screen size  
Switch “SIZE” in “HDMI SETTING” to “1” or  
“2”.  
Aspect ratio changes  
unintentionally.  
11  
11  
Press  
to return to your settings.  
Green and distorted  
screen for HDMI signal  
Wait a little for the signal to stabilize when  
switching the signal format for an “HDMI”  
device.  
Blue screen appears on  
the screen.  
Switch “BLUE BACK” to “OFF”.  
19  
 
Troubleshooting  
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.  
Problem  
No picture,  
No sound for HDMI signal  
Actions  
Page  
Use the cable marked with HDMI logo.  
15  
Check if the device is compliant with HDMI.  
Switch “AUDIO” in “HDMI SETTING” to  
“DIGITAL” or “AUTO” for HDMI devices, or  
“ANALOGUE” or “AUTO” for DVI devices.  
Some functions do not  
work.  
It is not a malfunction. Some functions  
(dark background) in the menu do not work  
depending on the situation.  
Black or white dots  
appear on the screen.  
LCD panels use fine dots (“pixels”) to  
display images. While more than 99.99% of  
these pixels function properly, a very small  
number of pixels may not light, or may light  
all the time.  
Please understand that this is not a  
malfunction.  
No picture,  
No sound  
Some inputs do not output from OUT  
terminal.  
20  
 
CH/CC List  
To use the INSERT function, find the “CH/CC” number corresponding to the TV’s channel number from this table.  
US:  
CCIR:  
OIRT:  
The US channel numbers are the channel numbers used in the United States, Philippines, etc.  
The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.  
The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.  
AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.  
CC 24  
CC 25  
CC 26  
CC 27  
CC 28  
CC 29  
CC 30  
CC 31  
CC 32  
CC 33  
CC 34  
CC 35  
CC 36  
CC 37  
CC 38  
CC 39  
CC 40  
CC 41  
CC 42  
CC 43  
CC 44  
CC 45  
CC 46  
CC 47  
CC 48  
CC 49  
CC 50  
CC 51  
CC 52  
CC 53  
CC 54  
CC 55  
CC 56  
CC 57  
CC 58  
CC 59  
CC 60  
CC 61  
CC 62  
CC 63  
CC 64  
CC 75  
CC 76  
CC 77  
CC 78  
CC 79  
CC 95  
CC 96  
CC 97  
CC 98  
CC 99  
K
S-24  
S-25  
S-26  
S-27  
S-28  
S-29  
S-30  
S-31  
S-32  
S-33  
S-34  
S-35  
S-36  
S-37  
S-38  
S-39  
S-40  
S-41  
Channel  
CH 48  
CH 49  
CH 50  
CH 51  
CH 52  
CH 53  
CH 54  
CH 55  
CH 56  
CH 57  
CH 58  
CH 59  
CH 60  
CH 61  
CH 62  
CH 63  
CH 64  
CH 65  
CH 66  
CH 67  
CH 68  
CH 69  
US-48, W+63  
US-49, W+64  
US-50, W+65  
US-51, W+66  
US-52, W+67  
US-53, W+68  
US-54, W+69  
US-55, W+70  
US-56, W+71  
US-57, W+72  
US-58, W+73  
US-59, W+74  
US-60, W+75  
US-61, W+76  
US-62, W+77  
US-63, W+78  
US-64, W+79  
US-65, W+80  
US-66, W+81  
US-67, W+82  
US-68, W+83  
US-69, W+84  
E48  
E49  
E50  
E51  
E52  
E53  
E54  
E55  
E56  
E57  
E58  
E59  
E60  
E61  
E62  
E63  
E64  
E65  
E66  
E67  
E68  
E69  
CH  
L
US  
CCIR  
E2  
OIRT  
AUSTRALIA  
AU-0  
M
CH 02  
CH 03  
CH 04  
CH 05  
CH 06  
CH 07  
CH 08  
CH 09  
CH 10  
CH 11  
CH 12  
CH 13  
CH 14  
CH 15  
CH 16  
CH 17  
CH 18  
CH 19  
CH 20  
CH 21  
CH 22  
CH 23  
CH 24  
CH 25  
CH 26  
CH 27  
CH 28  
CH 29  
CH 30  
CH 31  
CH 32  
CH 33  
CH 34  
CH 35  
CH 36  
CH 37  
CH 38  
CH 39  
CH 40  
CH 41  
CH 42  
CH 43  
CH 44  
CH 45  
CH 46  
CH 47  
US-2  
R1  
N
US-3  
E3  
AU-1  
O
US-4  
E4  
R2  
R6  
R7  
R8  
R9  
AU-2  
P
US-5  
E5  
AU-6  
Q
US-6  
E6  
AU-7  
R
US-7  
E7  
AU-8  
S
US-8  
E8  
AU-9  
T
US-9  
E9  
U
US-10  
E10  
E11  
E12  
R10  
R11  
R12  
AU-10  
AU-11  
V
US-11  
W
US-12  
W+1  
W+2  
W+3  
W+4  
W+5  
W+6  
W+7  
W+8  
W+9  
W+10  
W+11  
W+12  
W+13  
W+14  
W+15  
W+16  
W+17  
W+18  
W+19  
W+20  
W+21  
W+22  
W+23  
W+24  
W+25  
W+26  
W+27  
W+28  
US-13  
US-14, W+29  
US-15, W+30  
US-16, W+31  
US-17, W+32  
US-18, W+33  
US-19, W+34  
US-20, W+35  
US-21, W+36  
US-22, W+37  
US-23, W+38  
US-24, W+39  
US-25, W+40  
US-26, W+41  
US-27, W+42  
US-28, W+43  
US-29, W+44  
US-30, W+45  
US-31, W+46  
US-32, W+47  
US-33, W+48  
US-34, W+49  
US-35, W+50  
US-36, W+51  
US-37, W+52  
US-38, W+53  
US-39, W+54  
US-40, W+55  
US-41, W+56  
US-42, W+57  
US-43, W+58  
US-44, W+59  
US-45, W+60  
US-46, W+61  
US-47, W+62  
E21  
E22  
E23  
E24  
E25  
E26  
E27  
E28  
E29  
E30  
E31  
E32  
E33  
E34  
E35  
E36  
E37  
E38  
E39  
E40  
E41  
E42  
E43  
E44  
E45  
E46  
E47  
Channel  
CC  
US  
CCIR  
S-1  
OIRT  
AUSTRALIA  
CC 01  
CC 02  
CC 03  
CC 04  
CC 05  
CC 06  
CC 07  
CC 08  
CC 09  
CC 10  
CC 11  
CC 12  
CC 13  
CC 14  
CC 15  
CC 16  
CC 17  
CC 18  
CC 19  
CC 20  
CC 21  
CC 22  
CC 23  
AU-5  
S-2  
S-3  
S-4  
S-5  
S-6  
AU-5A  
S-7  
S-8  
S-9  
S-10  
S-11  
S-12  
S-13  
S-14  
S-15  
S-16  
S-17  
S-18  
S-19  
S-20  
S-21  
S-22  
S-23  
A
B
C
D
E
F
G
H
I
X
Y
R3  
R4  
R5  
Z
AU-3  
AU-4  
Z+1  
Z+2  
A-5  
A-4  
A-3  
A-2  
A-1  
J
21  
 
Specification  
Main unit  
Terminals / Connectors  
Terminal name  
Terminal type  
Signal type (IN)  
Signal type (OUT) Notes  
Model  
LT-32EX17/LT-32EX177  
LT-37EX17  
LT-42EX17  
Broadcasting systems  
Colour systems  
B / G / I / D / K / M  
VIDEO-1  
RCA connectors x 6  
Composite video, Analogue  
component (576i (625i) / 480i (525i),  
Progressive : 576p (625p) / 480p (525p),  
HD : 1080i (1125i), 720p (750p)  
AUDIO L/R  
PAL, SECAM, NTSC 3.58 / NTSC 4.43 MHz  
Channels and frequencies  
VHF low channel (VL) = 46.25 to 140.25 MHz  
VHF high channel (VH) = 147.25 to 423.25 MHz  
UHF channel (U) = 431.25 to 863.25 MHz  
Receives cable channels in mid band (X to Z+2, S1 to  
S10), super band (S11 to S20) and hyper band (S21 to  
S41)  
VIDEO-2  
RCA connectors x 3  
RCA connectors x 3  
Composite video, AUDIO L/R  
Composite video, S-video,  
Input  
terminals  
VIDEO-3  
HDMI  
S-VIDEO connector x 1 AUDIO L/R  
Sound-multiplex systems  
Teletext systems  
NICAM (I / B / G / D / K), A2 (B / G / D / K)  
FLOF (Fastext), WST (standard system)  
HDMI connector x 1  
HDMI  
Power requirements  
AC 110 V - 240 V, 50/60 Hz  
(Except China, Russia : connect to a 220-240 V,  
50/60 Hz AC outlet.)  
(576i (625i) / 480i (525i) /  
576p (625p) / 480p (525p),  
1080i (1125i), 720p (750p)  
Audio output  
(Rated power output)  
6 W + 6 W  
10 W + 10 W  
10 W + 10 W  
IN HDMI  
RCA connectors x 2  
AUDIO L/R  
Speakers  
(16 cm x 4 cm)  
oblique x 2  
(16 cm x 4 cm)  
oblique x 2  
MONITOR RCA connectors x 3  
OUT  
Composite video,  
Audio L / R  
(12 cm x 5 cm) x 2  
Output  
terminals  
Power consumption  
[Standby]  
115 W  
[1.4 W]  
147 W  
[1.1 W]  
203 W  
[1.1 W]  
Headphone Stereo mini-jack x 1  
(3.5 mm in diameter)  
Headphone  
output  
Screen size  
(Visible area size measured  
diagonally)  
80 cm  
92 cm  
105 cm  
We may change the design and specifications without notice.  
Dimensions (W x H x D: mm) 800 x 595 x 230  
[without stand]  
919 x 651.7 x 230 1030 x 719.1 x 296  
[800 x 545 x 99] [919 x 603.7 x 108] [1030 x 672 x 108]  
Weights  
[without stand]  
13.3 kg  
[12.5 kg]  
19.4 kg  
[18.3 kg]  
23.5 kg  
[22 kg]  
Accessories  
(See “Check accessories”, P. 3)  
© 2007 Victor Company of Japan, Limited  
0807WKT-NF-MT  
 

Infinite Peripherals Printer PP 55 User Manual
Jenn Air Cooktop W10197058B User Manual
Jensen Car Video System VM9511TS User Manual
John Deere Utility Vehicle TH User Manual
JVC CRT Television AV 30W476 User Manual
JVC Flat Panel Television BC50R User Manual
Kenwood Car Speaker KFC HQR16 User Manual
Kenwood Mixer KM010 User Manual
KitchenAid Toaster 4KPTT780 User Manual
Kodak Projector 2H2270 User Manual