Knoll Stereo System MR164 User Manual

Input  
MR164 Keypad  
Operating  
Instructions  
Line 1  
Line 2  
select  
button  
LCD display  
Volume UP  
Volume  
select  
button  
INPUT  
VOL  
M UTE  
and DOWN or  
source select or  
sets backlighting  
Congratulations and thank you for choosing this  
Knoll product. The MR164 keypads can control the  
GSZ67 controller-amplifiers. They are very easy-to-  
use giving you top quality sound available in up to  
six or more rooms.  
Mute  
Button  
ALL  
OFF  
ALL button for whole  
house functions  
Shut off this room  
or shut off whole  
house (press for  
5 seconds  
Infrared  
Receiver  
The MR164 is available with two LCD colors, yellow-  
green with black lettering and blue with white  
lettering (model MR164b). Both versions are  
available with Decora™ style bezel plates in white,  
almond, black or ivory colors.  
Adjusting Backlighting. MR164’s are backlit for  
easy nighttime operation. To  
adjust the backlighting make  
sure the power for the keypad is  
on and the MR164 is displaying:  
System  
Off  
The music system consists of:  
Without pressing any other buttons press the UP or  
DOWN button to increase or decrease the  
backlighting illumination. The level selected will  
remain in the memory even if the power is  
disconnected.  
1. Rooms with stereo speakers, a MR164 keypad or a  
third party whole house controller and possibly a  
remote control.  
2. One or more GSZ67 controller-amplifiers.  
Turning on a source to this room with the  
MR164 keypad. After the system is completely  
installed, if the system is not yet turned on, turn the  
sources on and then turn the GSZ67 controller  
amplifier using the front power button on the GSZ67.  
3. Stereo source components such as tuners, CD  
players, satellite dish receivers, cassette decks, and  
other components.  
While the MR164 evolved after years of research, its  
use is straightforward and direct. Some rooms may  
have more than one pair of speakers and one or two  
MR164 keypads or possibly even no keypad.  
After power has been turned on  
the MR164 keypad will display its  
software revision followed by  
“Knoll Systems” and then:  
System  
Off  
The music system is controlled by the MR164  
keypads, RB12 or universal remote, the source  
components and possibly a whole home controller.  
The source components are controlled by their  
individual remote controls by aiming the remote  
control at the keypad or infrared receiver and  
pressing the appropriate remote control button.  
To turn a source on in this room press the INPUT  
button. The volume is always set at about 30% when  
the room speakers are first turned on. This room will  
always revert to the source it was switched to when  
it was turned off last time. To change to another  
source, see changing sources below.  
Turn on a source in this room using the RB12  
Remote Control. To turn on a source in this room  
using the RB12 remote control press the RB12  
remote control 1, to 7 button corresponding to  
which source you want to listen to. You do not need  
to press the POWER button on the remote first.  
Please read about the GSZ67 with the manual  
shipped with that product.  
MR164 Keypad Operation  
The MR164 keypad is relatively easy to operate and  
within a short period of time should be very intuitive.  
Whole house source selection is not available from  
the RB12 remote.  
Please ensure that keys are not pressed too fast as  
the controller or keypad may be confused. If this  
happens reset the system powering it off and then  
on again.  
 

JBL Speaker L8400P User Manual
Jenn Air Refrigerator W10379134A User Manual
John Lewis Oven JLBIDOS904 User Manual
JVC Camcorder Accessories BN V856 User Manual
JVC CD Player MX J9 User Manual
JVC Stereo System UX V55R User Manual
Karcher Pressure Washer K 391 M User Manual
King Canada Saw KC 712GH 5 User Manual
KitchenAid Beverage Dispenser WINE CELLAR User Manual
KitchenAid Food Warmer 4452828 User Manual